Stickz Permanent Adhesive

Click to View Larger Image
Stickz Permanent Adhesive
Stickz by Xyron are the easiest way to apply even edge-to-edge adhesive to items up to 12 inches wide and ½ inch thick. Stickz are acid-free and non-toxic.
Permanent Adhesive has the strongest hold and is great for textured and porous surfaces
SKU: 3502-05-40
Features:
- Perfect for: Photos, paper crafts, home décor, acrylic, chipboard, vellum, metal, light 3-dimensional objects, glass and school and office projects.
29.9929.99
- Highlights
- Related Videos
| Max Material Width | 12.5 in (31.8 cm) |
| Weight | 2.1 |
| Dimensions (W x H x L) | 15.5in x 7in x 3in (39.4cm x 17.8cm x 7.6cm) |
Fabric Refillz Demo

Creatopia Refillz

Creatopia Overview

Creatopia Commercial - Science Project

Creatopia Refillz - Thick Items

Creatopia Commercial - Family Vacation

Related Products
- SKU: 3501-05-0099.9999.99
- SKU: 3502-06-4029.9929.99
- SKU: 3502-10-4029.9929.99
- SKU: 3502-01-4029.9929.99
Scroll for More

Halloween Chandelier
Artist:
Sandy Clements
Estimated Time:
2
Difficulty:
Intermediate-Difficult
Step-by-Step Instructions
- If using the PDF file, enlarge pattern and print. If using the .FS file, In Create and Cut, you can enlarge Chandelier pattern to fit the size of foam core board. Print using the “Tile” option in your print dialog box so that it will print out then entire design on several sheets of paper. Place printed pages through the Creatopia using repositionable adhesive cartridge. Adhere the printed pages to the foam core board.
- Using a craft Knife cut out each chandelier piece and 12 circles and candle holders. Cover each piece with a light coat of glitter.
- Assemble the main chandelier pieces by sliding them together. Take each Styrofoam ball and press into the top and bottom of the chandelier. Press firmly so the Styrofoam ball forms to the chandelier pieces.
- Punch a hole into each side of “chandelier-a” then place a key ring through each hole and hang with chain
- Cut 12 – one inch x 12” strips using the Xyron Creatopia Cutz cartridges with the scallop cut on one side and the straight cut on the other.
- Place each strip through the Xyron Creatopia Border Patternz star cartridge.
- Place strips through the Xyron Creatopia with permanent adhesive. Wrap each strip around each cut circle. Place the 12 wrapped circles on the 12 candleholder pieces. Place each piece on Chandelier. If pieces are wobbly adhere with hot glue.
- Using the Xyron Creatopia Cutz and the straight blade cut twelve 4 - 1/2” x 6” strips for candles and twelve 1” x 6” strips for candle accents. Cut twelve ¼” x 12” strips. Place all strips through the Creatopia with permanent adhesive cartridge.
- Using the 1” circle punch make 12 circles. Fold the smallest strips in half and adhere the fold to the back of each circle. Roll the 4 - 1/2” strips around the circle to form a candle (with the thin strips adhering to the inside of the candle. Use the 1” strips to around each candle. Hot glue each candle to the chandelier as shown. Attach a small piece of string to the top of each candle to form a wick.
- Place leftover paper scraps through the Xyron Creatopia with permanent adhesive cartridge. Tear the paper into scraps and cover each styrofoam ball with paper. Use glitter glue to cover the entire surface of the ball. When dry, hot glue each ball to the top and bottom of the chandelier.
- Place all large embellishments through the Xyron Creatopia, it will allow up to 1/2" thick. Place embellishments on chandelier. Add strings of beads and jewels as shown. Two large jewels can be sandwiched between the string or wire to form hanging embellishments.
- You can eliminate steps 8 through 9 by adding real candles – small votive candles would work great. Instead of hanging beads around the chandelier hang Halloween lights around it. Note: Some types of foam core board can warp. In the event that it does, after pieces are dry, but before assembling, place under a heavy box to flatten. Use additional hot glue to hold it together.
Other Materials
- 2 Sheeets Black Foan Core Board
- 2 Styrofoam Boalls
- Black Glitter
- Variety of Scrapbook Ppaer and/or Cardstock
- Jewels, Brads and other Embellishments
- Wire or Thread
- 2 Key Rings and Chain to Hang
- Craft knife
- Needle or Punch
- Chandelier Pattern
- Hot Glue Gun

Baby Shadow Box
Artist:
Kay Brown
Estimated Time:
1
Difficulty:
Beginner
Step-by-Step Instructions
- Run fabric through the Xyron Creatopia with the Fabric Adhesive cartridge. Adhere to the shadow box back.
- Run memorabilia (booties, hat) and photo's through the Xyron Creatopia with the Permanent Adhesive cartridge. Adhere items to fabric covered back.
- Run embellishments, such as buttons, lace and flowers through Xyron 1.5" create-a-sticker. Adhere to fabric covered back. Stick hat pin to embellish.
Other Materials
- Shadow Box
- Fabric
- Buttons
- Memorabilia
- Flowers
- Lace
- Hat Pin
- Photo's

Floral Covered Fabric Album
Artist:
Elizabeth Bracco
Estimated Time:
1
Difficulty:
Intermediate-Difficult
Step-by-Step Instructions
- Run all fabric thru the Xyron Creatopia using the fabric adhesive. With the adhesive side up carefully remove the adhesive backing from both pieces of fabric to be used for the back cover.
- Overlap the larger piece of fabric onto the smaller piece of fabric by .5”. Lay the pieces of chipboard in the center of each fabric. There should be about 1/8” or ¼” gap between the two pieces of chipboard. This is how the book will open and close correctly.
- Fold fabric over chipboard and rub with the edge of the bone folder for a smooth finish. Take care to fold in corners first. Repeat for front cover.
- Cut two pieces of cardstock to cover the inside of the front and back covers. Run them thru the Xyron Creatopia using the permanent adhesive and adhere to inside front and back covers of book. OPTIONAL: Run the cut pieces of cardstock thru the Creatopia Patternz or Border Patternz to emboss a design before applying adhesive. This will add an extra decorative touch to your special book.
- Punch evenly spaced holes in the center of the front and back cover spine edges using the heavy duty hole punch. Cut your miscellaneous paper to fill the book to the size(s) you want and then line up with the holes in the cover and punch. Depending on the thickness of your book and type of paper you may need to repeat this step several times.
- After lining up all of your cover and paper edges thread the holes with ribbon to secure the book. Tie a bow to finish or knot the ribbon and tie beads to the end of ribbon. There are many ways to finish off your ribbon.
- Decorate cover as desired. Use the Xyron Creatopia to adhere all of your embellishments . It can handle items up to .5” in thickness. For small items use the Xyron 3/8" Adhesive Runner.
Other Materials
- Two Coordinating Fabrics to Cover Chipboard 6.5” x 2.5” and 6.5” x 7.5” (2 of each)
- 2 Pieces Coordinating Cardstock
- Ribbon and Embellishments for Cover
- Heavy Duty Hole Punch
- Heavy Chipboard: 5.5” x 1.5” and 5.5” x 6.5” (2 of each size)
- Bone Folder
- Miscellaneous Paper to Fill Book
- Scissors and Paper Trimmer

New Year's Eve Party Favors
Artist:
Kay Brown
Estimated Time:
2
Difficulty:
Beginner
Step-by-Step Instructions
- Use the Xyron Creatopia Cutz with the straight or decorative blade to cut cardstock for placemats and 4" x 4" placecards.
- Use the Xyron Creatopia Shapez to cut out circles, stars,"2010" and guests names.
- Use the Xyron Creatopia Border Patternz to add texture to the stars, scallop to the green cardstock and stars to the pink cardstock.
- Run your stars, numbers, names through your Xyron 2.5" create-a-sticker or Xyron Creatopia with Permanent adhesive. Attach as shown.
- Use the Xyron 3/8" Adhesive Runner to adhere the circles to the place cards and party favors.
- Recycle your New Year's Party Favors from year to year, by changing the year, names and colors.
Other Materials
- Party Hat
- Party Favors
- Cardstock - Pink, Green, Blue
- Glitter
- Cutting Dies - Circle, Dies, Numbers and Alphabet

Bird Cage Wall Art
Artist:
Kay Brown
Estimated Time:
0.5
Difficulty:
Intermediate
Step-by-Step Instructions
- Paint canvas. Dry brush second color of paint on top of dryed canvas.
- Tear patterned paper at an angle down the right side. Run paper thru the Xyron Creatopia with permanent adhesive and adhere to canvas.
- Apply rub-ons to cardstock mat. Run mat and buttons thru the Xyron Creatopia. Adhere mat 3" from right side and 1" from bottom of canvas.
- Use the Xyron Creatopia with fabric adhesive to run the muslin embroidered square, ribbon, trim and fabric flower.
- Adhere muslin embroidered square 1" from right side and 4" from bottom of canvas. Adhere ribbon and trim.
- Adhere silk flower off center over trim and buttons as desired.
Other Materials
- Canvas
- 1 Sheet of Patterned Paper
- Small Cardstock Mat
- 2 colors of Acrylic Paint and Brush
- Machine Embroidery on Muslin
- Various Ribbons and Trim
- Flower
- Rub-Ons
- Buttons

Fall Leaves with Gabby
Artist:
Julie Conyers
Estimated Time:
1
Difficulty:
Intermediate
Step-by-Step Instructions
- Cut a 3” x 12” piece of gold cardstock using the Xyron Creatopia Cutz Component with a wave blade to cut design into paper.
- Use the Xyron Creatopia Cutz Component to cut a 2” x 12” piece of dark brown cardstock. Use the Xyron Creatopia Cutz Component to cut a 2” x 12” piece of orange cardstock using a decorative edge blade. Cut both sides.Change the Xyron Creatopia Cutz Cartridge to a deckle patternz and cut a 4” x 1 1/2” strip of green cardstock.
- Take out the Xyron Creatopia Cutz Component and replace with the Xyron Creatopia Patternz Border Emboss Starter Kit. Use the flower patternz and emboss on the dark brown cardstock, change border emboss to dots to use on orange cardstock and change to hearts to use on green cardstock.
- Run embossed strips of paper, leaves and photo’s through the Xyron Creatopia with the Permanent Adhesive
- Adhere strips of paper on left side of paper. Layer with gold, brown and orange on top. Adhere colored rhinestones on top of some of the dots on the orange cardstock.
- Take your “Autumn” sticker or die cut and adhere on top of page
- Adhere your green heart cardstock on bottom of page and then add photo’s on page.Position leaves on left side of page.
- Run your gold leaves and pumpkin wood embellishment through the Xyron Creatopia which will allow you to run up to ½” items through the machine.
- Adhere pumpkins on bottom right and gold leaves to photo on top. Embellish with a jewel brad or button.
Other Materials
- Brown Patterned Paper
- Orange, Gold & Green Cardstock
- 2- Dark Brown Cardstock
- Fabric or Paper Leaves
- Fall Multi-Colored Thinestones
- Autumn Leaves Title Sticker
- Pumpkin Wood Embellishment
- 3/4" Orange Brad or Button
- Gold Leaves Embellishment
- Photo's



