Magnet Tape
Click to View Larger Image
Magnet Tape
3/4" wide x 300" (25') long dispenses easily and can be torn with your hands. Strong magnetic strength allows the Xyron magnet tape to be thinner than other magnets.
SKU: XSDT002
Features:
- Can be torn with your hands.
- Dispenses easily.
- Use only as much as you need - no need to buy full sheets.
6.996.99
Teacher Favor Jar
Artist:
Jessica Barnett
Estimated Time:
0.5
Difficulty:
Beginner
Step-by-Step Instructions
- Start by measuring the inside height of the jar and cutting a strip (or strips) of the school themed paper to fit. Place these inside the jar (you may need more than one depending on the circumference of the jar and whether or not there’s a gap left after you put in the first piece).
- To measure the length of ribbon needed, wrap a piece around the jar and trim so that it’s just long enough to overlap about an inch. Run this wider ribbon through the Xyron 2.5" create-a-sticker, then apply to the outside of the jar.
- Use the same method for measuring to cut a piece of ribbon to wrap around the outside edge of the lid. Run this piece through the Xyron 1.5" create-a-sticker and apply to the lid.
- Measure a scrap of paper to fit the width of the clip, then cut it to length. Run this piece through the Xyron 1.5" create-a-sticker and attach to the outside edge of the clip. Trim if necessary. Attach the small strip of Xyron Magnet Tape to the bottom of the clip so it will stay in place on the metal lid.
- Tie the short piece of ribbon to the smallest point on the binder clip’s two metal pieces. They should stand straight up, and will hold the label on top of the jar.
- Cut an oval shape out of a scrap piece of cardstock. Cut out another shape to layer on top of the oval. Here we used an apple shape to keep with the school theme. Attach the shape to the top of the oval using the Xyron 3/8” Adhesive Runner, then slip the whole label into the binder clip.
Other Materials
- Jar with Metal Lid
- Scraps of Cardstock
- Back To School Themed Paper
- Binder Clip
- 1" Wide Ribbon
- 2" Wide Ribbon
- Paper Trimmer
Halloween CD Case
Artist:
Alice Golden for Xyron and Karen Foster Design
Estimated Time:
1.5
Difficulty:
Intermediate
Step-by-Step Instructions
- With the Xyron Design Runner and Occasions design disc print "Spooktacular" several times in a circle onto the Papaya Puree Dark cardstock. (Tip: I found the easiest way to do this is to hold the Design Runner in one position and rotate the cardstock. Practice on scrap paper first!). Trim to fit metal CD tin and ink edges with black ink.
- Print "Halloween Music" on Ghoulish Green paper and trim to circle shape to fit inside cardstock, as shown. Ink edges with black and add witches hat sticker to one edge.
- Attach orange loopy brads to either side of circle and thread with orange Scrapper's Floss. Add alphabet beads to a safety pin to spell "Boo" and attach to Scrapper's Floss. Knot mini orange ric-rac through end of safety pin.
- Apply magnet tape to back of decorated cardstock and adhere to cover of CD tin.
Other Materials
- Papaya Puree Dark cardstock - Karen Foster Design
- Ghoulish Green paper - Karen Foster Design
- Happy Halloween Stickers - Karen Foster Design
- Limeade Simply Sweet Cardstock Stickers - Doodlebug Design, Inc.
- Black & White Long Doubledecker Ink Pad - Karen Foster Design
- Orange Loopy Brads - Karen Foster Design
- Orange Scrapper's Floss - Karen Foster Design
- Orange Mini Ric-Rac - The Ribbon Jar
- Alphabet Beads - Westrim Crafts
- Metal CD Tin - Wilton
Fancy Stocking Wishlist
Artist:
Elizabeth Bracco
Estimated Time:
1
Difficulty:
Intermediate
Step-by-Step Instructions
- Stocking: Trace and cut two stockings from the bright pink cardstock. Run the Xyron 3/8" Adhesive Runner around the edges of one of the stockings. Make sure to leave the top without adhesive. (This will be the opening for the wishlist to go into.) Place the second stocking on top and press together.
- Cut four triangles from white cardstock using the Xyron Personal Cutting System and Basic Shapes Book. Run triangles thru the Xyron 9" Creative Station and attach to top of stocking, points down. Apply lime green rhinestones to all four triangle points using the Xyron 3/8" Adhesive Runner.
- Run two strips of adhesive using the Xryon 3/8" Runner to the top of the stocking and tip of toe on stocking. Press marabou trim onto adhesive. Trim ends.
- Cut one wavy edge from shape (#2) from the Tag Shapes book using the Xyron Personal Cutting System. Use the Xyron Design Disc Maker and Fairytale Font to print the label "Mom's Wishlist" using the Xyron Design Runner onto white cardstock. Cut to fit behind the lime green frame. Cut heel patch out of white cardstock following the template pattern. Run heel patch, frame and white label thru the Xyron 9" Creative Station and attach to stocking. (see photo for reference in placing items if needed.)
- Use the green marker to draw faux stitching around the edges and the heel patch.
- Goodies in Stocking: Cut a strip of white cardstock 8" x 2" (this will be the wishlist)
- Trim a piece of white cardstock 1/2" x 5" and a strip of red cardstock 3/8" x 6". Run the white cardstock thru the Xyron 1.5" create-a-sticker. Lay red strip across at an angle and snip at edges, repeat until it looks like a candy cane. Run again thru the Xyron 1.5" create-a-sticker and sprinkle with clear microbeads.
- Using the Xyron Personal Cutting System and Basic Shapes Book cut one circle from the red cardstock and one circle from the transparecncy. Cut four small circles from white cardstock. Run the white circles thru the Xyron 1.5" create-a-sticker and apply white glitter. Run again thru the Xyron 1.5" create-a-sticker and apply to transparency circle. Apply adhesive on the backside of the transparency using the Xyron 3/8" Adhesive Runner, under the white circles and adhere transparency to the red circle. (This will hide the adhesive behind the white circle.)
- Using the Basic Shapes Book with the Xyron Personal Cutting System cut one left shape from the bright pink cardstock and one leaf shape from the transparency. Using the Xyron 3/8" Adhesive Runner make diagonal lines across the transparency left shape and adhere to bright pink cardstock. Tracing over the exact line, run another strip of adhesive using the Xyron 3/8" Adhesive Runner. Apply bright pink glitter.
- Use the gingerbread die cuts or cut two gingerbread men from brown cardstock using the Xyron Wishblade. Layer and attach the goodies to the top of the white cardstock wishlist. Insert list into stocking so the goodies are sticking out the top.
- This list can be adhered to the wall, pinned to a corkboard or you can attach some Xyron Magnet Tape to the back and hang on the fridge. This is a great decorative way to keep a list of what everyone wants for the holidays.
Other Materials
- Cardstock - Red, White, Lime Green, Brown and Bright Pink
- White Marabou Trim
- Lime Green Rhinestones
- Transparency Sheet
- Clear Microbeads
- Bright Pink and White Glitter
- Green Fine Tip Marker
- Gingerbread Die Cuts (Or use Xyron Wishblade to make die cuts)
- Stocking Template
- Paper Trimmer
- Scissors
Adhesive Solutions
