Borderz - Dots

Click to View Larger Image
Borderz - Dots
Add special flair to borders and strips of paper with 3 inch wide designs. These cartridges work with the Borderz Starter Kit.
SKU: 3504-32-00
Features:
- These cartridges work with the Xyron Border Patternz Starter Kit
- This component works with Xyron Creatopia.
8.998.99
- Highlights
- Related Videos
| Operational Width: | 2.625in (6.7cm) |
| Weight | .2 lbs |
| Dimensions (W x H x L) | 2 each - 2.625in x 1in x 1in (6.7cm x 2.5cm x 2.5cm) |
Creatopia Overview

Border Patternz Demo

Related Products
- SKU: 3501-05-0099.9999.99
- SKU: 3504-30-0019.9919.99
- SKU: 3504-35-008.998.99
- SKU: 3504-31-008.998.99
- SKU: 3504-34-008.998.99
- SKU: 3504-36-008.998.99
- SKU: 3504-33-008.998.99
- SKU: 3503-33-0024.9924.99
Scroll for More

Pink/Glitter Cutz Frame
Artist:
Angela Ploegman
Estimated Time:
0.5
Difficulty:
Beginner
Step-by-Step Instructions
- Use the Xyron Creatopia Cutz with decorative blades to cut 12 - 3/4" x 9" strips using the colored core cardstock.
- Cut a 4.25" x 4.25" piece of pink cardstock using the deco blade and cut a 4" x 4" photo using a straight blade.
- Replace Creatopia Cutz with the Xyron Creatopia Border Patternz using the heart and dots patternz cartridges to emboss on the white side of cardstock.
- Sand the raised edges of the embossed cardstock.
- Run the ‘good side’ of an 8" x 8" square cardstock and photo through the Creatopia with the Permanent Refillz cartridge.
- Arrange the cut and embossed strips on the 8" x 8" adhesive square. Leave some gaps between the strips and sprinkle with glitter. Trim the excess with scissors.
- Adhere the photo to pink mat.
- TIP: Fold leftover adhesive strips to make a loop and apply them on back of photo mat. (This will create a 3D effect.)
- Place in frame and enjoy.
Other Materials
- Dark Pink Cardstock
- Light Pink Cardstock
- White w/Pink Core Cardstock
- Photo
- Sanding Block
- Glitter
- Scissors
- Frame

Precipitation Project
Artist:
Jessica Barnett
Estimated Time:
1
Difficulty:
Beginner
Step-by-Step Instructions
- Use the Xyron Shapez to die cut out letters and shapes for your project .
- Use the Xyron Cutz to cut mats and your diagrams/photos for your board. You may use decorative edge Cutz Cartridges.
- You may add decorative borders to your mats by using the Xyron Border Patternz dots or other Border Patternz Cartridges.
- Use the Xyron Creatopia with the Repositionable Refillz Cartridges to adhere your letters, mats, diagrams, photo's and die cuts to your poster board. Using repositionable adhesive allows you to reposition your items in case you need to change the order. Now help you child get an A+ on their science project.
Other Materials
- Poster Board
- Colored Cardstock
- Diagrams or Photos
- Cutting Dies

Cafe Wall Art
Artist:
Elizabeth Bracco
Estimated Time:
1
Difficulty:
Beginner
Step-by-Step Instructions
- Paint artist canvas with acrylic paint. Set aside to dry.
- Cut three circles (size to fit your canvas) from cardstock using a circle die run thru the Xyron Creatopia Shapez or die press of your choice. Using the Xyron Cutz straight cartridge, trim a small piece of the circle off for bottom of circles to make bottom of the cup. Trim more off the top of the circles to make the top of the cup.
- Use the Xyron Border Patternz flower pattern to emboss flowers on beige cardstock. Use the Xyron Border Patternz dots to emboss circles all over the white cardstock. Use the Xyron Border Patternz scallop to emboss top and bottom edge of brown cardstock. Then use the hole punch to punch out dots on bottom edge of cup.
- Use the rubber stamps and black ink to stamp randomly onto the painted canvas. Set aside to dry.
- Run the chipboard scrolls thru the Xryon Creatopia using the Permanent Adhesive cartridge. Apply coordinating glitters to ‘cup handles’ and ‘steam’. Run the chipboard scrolls thru the Xyron Creatopia again using the same adhesive cartridge only this time make sure the glitter side is up.
- Place pop dots or foam tape onto back of ‘cups’ and stack onto canvas. Once the cups are ‘stacked’ the way you like add the handles to the cups. Place steam scroll into the top cup.
Other Materials
- Artist Canvas
- Acrylic Pain
- Brown, Beige and White Cardstock
- Chipboard Scrolls (1 large & 3 small)
- Silver, Copper and Brown Glitter
- Permanent Black Ink Pad
- Rubber Stamps
- Paint Brush
- Circle Die
- Embossing Folders
- Pop Dots or Foam Tape
- Small Hole Punch

New Year's Eve Party Favors
Artist:
Kay Brown
Estimated Time:
2
Difficulty:
Beginner
Step-by-Step Instructions
- Use the Xyron Creatopia Cutz with the straight or decorative blade to cut cardstock for placemats and 4" x 4" placecards.
- Use the Xyron Creatopia Shapez to cut out circles, stars,"2010" and guests names.
- Use the Xyron Creatopia Border Patternz to add texture to the stars, scallop to the green cardstock and stars to the pink cardstock.
- Run your stars, numbers, names through your Xyron 2.5" create-a-sticker or Xyron Creatopia with Permanent adhesive. Attach as shown.
- Use the Xyron 3/8" Adhesive Runner to adhere the circles to the place cards and party favors.
- Recycle your New Year's Party Favors from year to year, by changing the year, names and colors.
Other Materials
- Party Hat
- Party Favors
- Cardstock - Pink, Green, Blue
- Glitter
- Cutting Dies - Circle, Dies, Numbers and Alphabet

Fall Leaves with Gabby
Artist:
Julie Conyers
Estimated Time:
1
Difficulty:
Intermediate
Step-by-Step Instructions
- Cut a 3” x 12” piece of gold cardstock using the Xyron Creatopia Cutz Component with a wave blade to cut design into paper.
- Use the Xyron Creatopia Cutz Component to cut a 2” x 12” piece of dark brown cardstock. Use the Xyron Creatopia Cutz Component to cut a 2” x 12” piece of orange cardstock using a decorative edge blade. Cut both sides.Change the Xyron Creatopia Cutz Cartridge to a deckle patternz and cut a 4” x 1 1/2” strip of green cardstock.
- Take out the Xyron Creatopia Cutz Component and replace with the Xyron Creatopia Patternz Border Emboss Starter Kit. Use the flower patternz and emboss on the dark brown cardstock, change border emboss to dots to use on orange cardstock and change to hearts to use on green cardstock.
- Run embossed strips of paper, leaves and photo’s through the Xyron Creatopia with the Permanent Adhesive
- Adhere strips of paper on left side of paper. Layer with gold, brown and orange on top. Adhere colored rhinestones on top of some of the dots on the orange cardstock.
- Take your “Autumn” sticker or die cut and adhere on top of page
- Adhere your green heart cardstock on bottom of page and then add photo’s on page.Position leaves on left side of page.
- Run your gold leaves and pumpkin wood embellishment through the Xyron Creatopia which will allow you to run up to ½” items through the machine.
- Adhere pumpkins on bottom right and gold leaves to photo on top. Embellish with a jewel brad or button.
Other Materials
- Brown Patterned Paper
- Orange, Gold & Green Cardstock
- 2- Dark Brown Cardstock
- Fabric or Paper Leaves
- Fall Multi-Colored Thinestones
- Autumn Leaves Title Sticker
- Pumpkin Wood Embellishment
- 3/4" Orange Brad or Button
- Gold Leaves Embellishment
- Photo's







