Occasions Design Disc
Click to View Larger Image
Occasions Design Disc
40 Themed Textures, Embellishments, Word Art and Shapes
Click "Enlarge" to view the complete set.
SKU: 24133
Features:
- Compatible with the Xyron Design Runner
- Print on wood, ribbon, paper and more
- Make your own wrapping paper and ribbon
34.9934.99
Boo Banner
Artist:
Kay Brown
Estimated Time:
2.5
Difficulty:
Beginner
Step-by-Step Instructions
- Cut bottom corners off of Katydid cardstock to create banner. Mat with Black cardstock. Trim top edge of Katydid cardstock with ribbon or buttons, adhering with Xyron 1.5" create-a-sticker or Xyron Medium Sticky Spots.
- Cover chipboard letters with patterned paper, by running letters through Xyron 2.5' create-a-sticker adhering paper and trimming around edges. Adhere to banner.
- Print sayings and designs on White cardstock using Xyron Design Runner. Mat with Black cardstock. Run through Xyron 1.5" create-a-sticker. Adhere to banner.
- Cut ghost, cat and spider (oval) using Xyron Personal Cutting System. Cut eyes and strips for legs for spider. Run all shapes through Xyron 2.5" create-a-sticker. Adhere to banner. Adhere small piece of feather boa for spider's hair.
- Using Xyron Medium Sticky Spots adhere flowers to banner. Use ribbon for stems.
- Use ribbon to tie banner together.
Other Materials
- Black Cardstock
- White Cardstock
- Bazzill Katydid Cardstock
- Doodlebug Flowers
- Doodlebug Buttons
- KI Memories Patterned Paper
- Black Feather Boa
- Ribbon Chipboard Letters
Fall Party Invitation
Artist:
Sandy Clements
Estimated Time:
2
Difficulty:
Intermediate
Step-by-Step Instructions
- Open the design templates in Xyron Create and Cut Software. Choose Cut. Cut 4 of each color item. Ink edges of all cut items (optional)
- Fold the large yellow piece to form the card. Place the Cut Maroon/ Striped cardstock items, the yellow printed paper pieces and the teal/green piece through the Xyron 9” Creative Station with permanent adhesive.
- Adhere the Maroon/ Striped cardstock items near the bottom of the card as shown. Adhere the large red cardstock pieces with foam Mounting tape to the top and bottom on the card.
- Adhere the yellow leaf/swirl with foam mounting tape in the top center portion of the card.
- Adhere the large yellow printed paper rectangle to the bottom of the card as shown. Adhere the orange paper leaf with foam mounting tape to the bottom left corner.
- To create the leaf charm: If using shrink paper, first print the word “Fall” using the Xyron Design Runner and the Occasions disk, on the leaf cut from shrink paper. Using a heat gun heat the leaf until it has shrunk down - or follow the manufacturers directions using a conventional oven.
- If using vellum, cut 2 additional leaves from red cardstock. Print the word “Fall” using the Xyron Design Runner and the Occasions disk, on one of the leaves cut from red cardstock. Place the vellum leaf through the Xyron adhesive machine. Adhere on top of the printed red cardstock leaf. Using foam-mounting tape adhere it on top of the second red cardstock leaf.
- Place a jump ring through the hole in the charm. Tie the charm to the card on the middle right section through the two cut holes using the gold floss/fiber.
Other Materials
- 4 Sheets of 8.5” x 11” Red Cardstock
- 4 sheets of 8.5” x 11” Yellow Cardstock
- 1 sheet of 12 x 12” Coordinating Yellow Printed Paper
- 1 Sheet of 12” x 12” Teal/Green Printed or Solid Cardstock
- 1 sheet of 8.5” x 11” Orange Printed or Solid Cardstock
- 1 sheet of 8.5” x 11 Maroon/ Striped cardstock
- 1 sheet of 8.5” x 11 Shrink Paper or Vellum
- Gold Jump Rings
- Gold Floss/Fiber
- Foam Mounting Tape
Love Card
Artist:
Alexis Hardy
Estimated Time:
1
Difficulty:
Beginner-Intermediate
Step-by-Step Instructions
- Using the Design Runner, print a continuos design across the front of the card, about ¾” down from the top.
- Cut out the bird image from the Valentine Paper and attach it to the card as shown.
- Using the Epoxy letter stickers, spell the word “LOVE” next to the bird.
- Attach the brads to the scallops on the front of the card and print the words “Valentine’s Day” across the bottom right edge of the inside of the card, using the Design Runner.
Other Materials
- Circle Card & Scallop Card
- Valentine Paper
- Heart Brads
- Epoxy Heart Letters
- Epoxy Stickers
- Black Pen
Circle Card
Artist:
Alexis Hardy
Estimated Time:
1
Difficulty:
Intermediate
Step-by-Step Instructions
- Place the circle card on top of a piece of black Lovey Dovey paper. Trace the card, cut out the image and run it through the 5" Creative Station. Adhere to the front of the card.
- Cut out two paisley images from the Lovey Dovey paper. Punch a 2.25” circle from a white piece of paper. Punch four small holes in the center of the circle, mimicking a button. Using the Adhesive Runner, attach the circle and two paisleys to the front of the card as shown in the photo.
- Using the paper piercer, punch two holes on the upper right hand side of the white circle. Place two shaped brads in those holes, a paisley and a heart brad. Pierce another hole next to the paisley on the lower left corner of the circle. Place a paisley brad in that hole.
- Outline the shapes with white dots and write the words “I Love You Always” with the white pen.
- Print the words “Kiss Me” from the Occasions Design Disk onto the red Lovey Dovey paper. Place the circle card on top of the printed words, centering them. Then trace the card, cut out the image and run it through the 5" Creative Station. Attach it to the inside of the card. Pierce a hole next to the words and put a heart Lovey Dovey brad through it.
- For the envelope, print a succession of hearts across the bottom using the Design Runner.
- Cut out four paisleys from the Lovey Dovey paper and attach them to the card as shown in the photo. You can also put a heart brad into just the front of the envelope so you can still put the card into it.
Other Materials
- Circle Card and Matching Envelope
- Lovey Dovey Papers
- Lovey Dovey Shaped Brads
- Paper Piercer
- White Ink Pen
- Scissors
- Inch Hole Punch
- Black Ink Pen
- 2.25" Circle Punch
Halloween CD Case
Artist:
Alice Golden for Xyron and Karen Foster Design
Estimated Time:
1.5
Difficulty:
Intermediate
Step-by-Step Instructions
- With the Xyron Design Runner and Occasions design disc print "Spooktacular" several times in a circle onto the Papaya Puree Dark cardstock. (Tip: I found the easiest way to do this is to hold the Design Runner in one position and rotate the cardstock. Practice on scrap paper first!). Trim to fit metal CD tin and ink edges with black ink.
- Print "Halloween Music" on Ghoulish Green paper and trim to circle shape to fit inside cardstock, as shown. Ink edges with black and add witches hat sticker to one edge.
- Attach orange loopy brads to either side of circle and thread with orange Scrapper's Floss. Add alphabet beads to a safety pin to spell "Boo" and attach to Scrapper's Floss. Knot mini orange ric-rac through end of safety pin.
- Apply magnet tape to back of decorated cardstock and adhere to cover of CD tin.
Other Materials
- Papaya Puree Dark cardstock - Karen Foster Design
- Ghoulish Green paper - Karen Foster Design
- Happy Halloween Stickers - Karen Foster Design
- Limeade Simply Sweet Cardstock Stickers - Doodlebug Design, Inc.
- Black & White Long Doubledecker Ink Pad - Karen Foster Design
- Orange Loopy Brads - Karen Foster Design
- Orange Scrapper's Floss - Karen Foster Design
- Orange Mini Ric-Rac - The Ribbon Jar
- Alphabet Beads - Westrim Crafts
- Metal CD Tin - Wilton
Design Runner
