Fairytale Font Disc
Click to View Larger Image
Fairytale Font Disc
A complete set of lower and upper case letters plus numbers and
punctuation.
Click "Enlarge" to view the complete set.
SKU: 48461
Features:
- Compatible with the Xyron Design Runner
- Print on wood, ribbon, paper and more
- Great for monograms on cards and tags
34.9934.99
At the Stroke of Midnight
Artist:
Kay Brown
Estimated Time:
2
Difficulty:
Intermediate
Step-by-Step Instructions
- Cut stripe paper 6" x 1 3/4". Adhere 1 3/4" from bottom of the paper and 1/2" from left side using the Xyron 2.5" create-a-sticker. Use the Xyron 1.5" create-a-sticker to adhere the velvet ribbon to the center of the paper. Then adhere the stripe ribbon over the velvet ribbon.
- Cut dot paper 6" x 8" and round corners. In top center punch out a half circle. Mat with black cardstock, leaving top open for a pocket. Adhere to right side of paper with the Xyron 3/8" Adhesive Runner. Adhere photo to pocket.
- Cut lime green cardstock 5" x 6". Adhere ribbon and button to top center of cardstock with the Xyron 3/8" Adhesive Runner. Insert in pocket for journaling.
- Cut title and date from black cardstock using Wishblade. Adhere them using the Xyron 2.5" Adhesive Runner. Accent with rhinestones.
- Use the Xyron Design Disc Maker to create a title and verse. Print verse, journaling and clock stamp on white cardstock. Cover with Diamond glaze. After drying, bend to crackle and age with black ink. Use the Xyron 1.5" create-a-sticker or Xyron 3/8" Adhesive Runner to adhere to page.
- Attach black fabric/rhinestone button over ribbon ends.
Other Materials
- Black, White and Lime Cardstock
- DCWV All Dressed Up Stack, Blue papers
- Velvet and Stripe Ribbon
- Large Black Jewel Button and Small Green Button
- Clock Rubber Stamp
- 1" Circle Punch
- Diamond Glaze
- Rhinestones
- Corner Rounder
- 4" x 6" Photo
Back in the Swim of Things
Artist:
Whitney Harmening
Estimated Time:
0.5
Difficulty:
Beginner
Step-by-Step Instructions
- Use one sheet of cardstock as the page foundation. Cut the star/dot patterned paper to 8”x12” & Adhere to the top portion of the page.
- Cut a piece of the “Splash” paper to 4” x 12” & adhere to the bottom portion of the page.
- Cut a ½” x 12” strip of the backside of the Splash paper (or use Solid navy blue cardstock) & adhere it on the seam where the two patterned papers meet.
- Mat a vertical 5”x7” photo on the solid side of the Splash paper (or solid navy cardstock) & adhere
- In the upper corner of the page, about 1” from the top & left edge. Adhere the pre-printed title block to the right of the photo (leave about a 1” space between).
- Use the Design Runner Disc Maker with the Fairy Tale font to print journaling on a portion of the remaining star/dot paper (the solid green backside) and add to the layout in the area below the title.
- Add the cut out paper turn to the bottom right section of the photo & put a mini brad through the center.
Other Materials
- Time Flies Patterned Paper
- One Mini Brad
- 1 Sheet Contrasting Cardstock
- 1 vertical 5”x7” photo
Birthday Party Invitation
Artist:
Elizabeth Bracco
Estimated Time:
0.5
Difficulty:
Beginner-Intermediate
Step-by-Step Instructions
- Score the 8.5” x 5.5” of cardstock in half (4.25” is center) this will be your card base.
- Use the Xyron 2" Adhesive Runner to adhere the 4” x 5.35” piece of light blue pattern cardstock to the center of the card base.
- Cut from the Xyron Wishblade are the cupcake with candle base from the striped pattern cardstock, cupcake topping from the pink and white polka dot pattern cardstock, the candle from the green and white pattern cardstock. Cut out a message banner from the pink cardstock that is 4" x 3/4".
- Run the striped cardstock cupcake with candle base thru the Xyron 5" create-a-sticker. Adhere to card base. TIP: Run the candle cut-out thru the Xyron 5" Creative Station at this same time to save adhesive.
- Run the pink and white polka dot cupcake topping thru the Xyron 5" create-a-sticker, POLKA DOT SIDE FACE DOWN. Place white sheer flowers over the adhesive and trim edges with scissors. Run the piece back thru the Xyron 5" create-a-sticker with the flower covered side up. Remove top backing.
- Before removing the candle from the adhesive backing, use the Xyron 3/8” adhesive runner to add adhesive to the ‘flame’ of the candle. Sprinkle with glitter. Remove candle from adhesive backing and adhere to top of cupcake, on top of cupcake topping.
- Follow the instructions for typing your own sentiment with the Xyron Design Disc Maker and print with the Xyron Design Runner using the Xyron Design Runner Accessory Kit. Print onto the pink message banner.
- Use the Xyron 3/8” adhesive runner to adhere the pink message banner to the cupcake bottom.
- Adhere the bluebird and crown to end of pink message banner.
Other Materials
- All paper and embellishments are from the Imaginesce Fairest Of Them All line unless otherwise noted.
- Pink cardstock 8.5” x 11”
- Light blue cardstock 8.5” x 5.5”
- Light blue patterned cardstock 4” x 5.25”
- Striped pattern cardstock 6” x 6”
- White and pink polka dot pattern cardstock 6” x 6”
- Green and white pattern cardstock 4” x 4”
- White sheer flowers – 3 per card
- Pink, green and blue glitter brads – 7 per card
- Bluebird and crown chipboard shapes
- Chunky crystal glitter
- Paper Trimmer
- Scoring tool
- Paper Piercer
- Scissors
Countdown to Christmas Wall Pocket
Artist:
Kay Brown
Estimated Time:
2
Difficulty:
Difficult
Step-by-Step Instructions
- Cover wall pocket with green dot patterned paper. Cut red cardstock stripe for front. Adhere with 9" Creative Station.
- Create pocket for front with red dot patterned paper. Adhere with 9" Creative station.
- Cut out title "countdown Christmas" and numbers (1 - 25) using the Whimsical Design Book in the Personal Cutting System using white, pink red and green cardstock. Run title and numbers through the 2.5" creative-a-sticker. Tip: Run number or letter through once and turn upside down and run through again. Peel off liner on one side and apply glitter. Adhere title to front of pocket. Cut out a 1 1/2" circle with white cardstock. Print "to" using the Design Disc Maker and Design Runner on white cardstock circle. Adhere to front of pocket using the 1.5" create-a-sticker.
- Cut journaling rectangles from the cardstock. Using the Design Runner and Design Disc Maker print an activity for each day on rectangles. Adhere numbers to the top of each one using the 3/8" runner.
- Run stars through the 2.5" create-a-sticker and apply glitter. Use the 3/8" runner to adhere the star on the wall pocket..
- Tie ribbon on to pocket for hanger.
Other Materials
- Wall Pocket - Creative Imaginations Rachel
- Red Dot Patterned Paper - Frances Meyer
- Green Dot patterned paper - Frances Meyer
- Pink Patterned Paper - Doodlebug
- Green, White, Red & Pink Cardstock
- Pink & Green Glitter
- Chipboard Stars - Scenic Route
- Ribbon
Christmas Journal
Artist:
Christina Klauer
Estimated Time:
0.5
Difficulty:
Beginner-Intermediate
Step-by-Step Instructions
- Trace front and back of composition book on patterend papers. Cut out. Use the Xyron 4" Adhesive Runner to adhere paper to book.
- Run 9 1/2" of ric rac through the Xyron 1.5" create-a-sticker and adhere to cover.
- Use the Xyron Personal Cutting System and Tag Shapes Book to cut out a 2 1/2" x 4 1/2" tag with patterned paper. Then cut a strip of 3/4" x 4 1/2". Use the Xyron Design Disc Maker to create custom words. Use the Xyron Design Runner to print the words and use the Junkitz Design Disc to print stitches anywhere on your project. Use the Xyron 4" adhesive runner to adhere tag to front cover.
- Add the buttons using Xyron 3/8" adhesive runner.
- Use the Xyron Personal Cutting System and Tag Shapes book to cut tabs. Use the Xyron Design Runner and Xyron Design Disc Maker to create your own titles on the tabs. Use the Xyron 3/8" adhesive runner to attach tabs to pages in the book.
Other Materials
- Patterned Papers - 4 kinds
- Composition Book
- Buttons - 3
- Mis. Trims, Ribbons & Fibers
- Paper Trimmer/Scissors
Fancy Stocking Wishlist
Artist:
Elizabeth Bracco
Estimated Time:
1
Difficulty:
Intermediate
Step-by-Step Instructions
- Stocking: Trace and cut two stockings from the bright pink cardstock. Run the Xyron 3/8" Adhesive Runner around the edges of one of the stockings. Make sure to leave the top without adhesive. (This will be the opening for the wishlist to go into.) Place the second stocking on top and press together.
- Cut four triangles from white cardstock using the Xyron Personal Cutting System and Basic Shapes Book. Run triangles thru the Xyron 9" Creative Station and attach to top of stocking, points down. Apply lime green rhinestones to all four triangle points using the Xyron 3/8" Adhesive Runner.
- Run two strips of adhesive using the Xryon 3/8" Runner to the top of the stocking and tip of toe on stocking. Press marabou trim onto adhesive. Trim ends.
- Cut one wavy edge from shape (#2) from the Tag Shapes book using the Xyron Personal Cutting System. Use the Xyron Design Disc Maker and Fairytale Font to print the label "Mom's Wishlist" using the Xyron Design Runner onto white cardstock. Cut to fit behind the lime green frame. Cut heel patch out of white cardstock following the template pattern. Run heel patch, frame and white label thru the Xyron 9" Creative Station and attach to stocking. (see photo for reference in placing items if needed.)
- Use the green marker to draw faux stitching around the edges and the heel patch.
- Goodies in Stocking: Cut a strip of white cardstock 8" x 2" (this will be the wishlist)
- Trim a piece of white cardstock 1/2" x 5" and a strip of red cardstock 3/8" x 6". Run the white cardstock thru the Xyron 1.5" create-a-sticker. Lay red strip across at an angle and snip at edges, repeat until it looks like a candy cane. Run again thru the Xyron 1.5" create-a-sticker and sprinkle with clear microbeads.
- Using the Xyron Personal Cutting System and Basic Shapes Book cut one circle from the red cardstock and one circle from the transparecncy. Cut four small circles from white cardstock. Run the white circles thru the Xyron 1.5" create-a-sticker and apply white glitter. Run again thru the Xyron 1.5" create-a-sticker and apply to transparency circle. Apply adhesive on the backside of the transparency using the Xyron 3/8" Adhesive Runner, under the white circles and adhere transparency to the red circle. (This will hide the adhesive behind the white circle.)
- Using the Basic Shapes Book with the Xyron Personal Cutting System cut one left shape from the bright pink cardstock and one leaf shape from the transparency. Using the Xyron 3/8" Adhesive Runner make diagonal lines across the transparency left shape and adhere to bright pink cardstock. Tracing over the exact line, run another strip of adhesive using the Xyron 3/8" Adhesive Runner. Apply bright pink glitter.
- Use the gingerbread die cuts or cut two gingerbread men from brown cardstock using the Xyron Wishblade. Layer and attach the goodies to the top of the white cardstock wishlist. Insert list into stocking so the goodies are sticking out the top.
- This list can be adhered to the wall, pinned to a corkboard or you can attach some Xyron Magnet Tape to the back and hang on the fridge. This is a great decorative way to keep a list of what everyone wants for the holidays.
Other Materials
- Cardstock - Red, White, Lime Green, Brown and Bright Pink
- White Marabou Trim
- Lime Green Rhinestones
- Transparency Sheet
- Clear Microbeads
- Bright Pink and White Glitter
- Green Fine Tip Marker
- Gingerbread Die Cuts (Or use Xyron Wishblade to make die cuts)
- Stocking Template
- Paper Trimmer
- Scissors
Design Runner
