Photo Bag

Photo Bag

Photo Bag

Artist:
Elizabeth Bracco
Estimated Time:
1 Hours
Difficulty:
Beginner

Step-by-Step Instructions

  1. Using the Xyron Creatopia machine with fabric adhesive, run your fabric squares thru machine so adhesive is on the back side. DO NOT PEEL OFF BACKING. Cut three fabric frames.
  2. Run your photos through the Xyron Creatopia machine using the laminate cartridge. Cut photos Using the Creatopia Cutz Component and largest label die you used for the frames.
  3. Layer the photos and frames onto bag as desired. Use the sewing machine and coordinating thread to sew through the frames, photos and bag. Repeat for all three frames/photos.
  4. Fold under edges of black twill and stitch to outside of bag (about 1 inch down from top of bag) using sewing machine and coordinating thread.

Xyron Products Used

Scroll for More

Other Products Used

  • Canvas Bag
  • Black Twill (width should match handles)
  • Cotton Fabric (just enough to make your frames)
  • Nesting Label Dies
  • Photo's
  • Sewing Machine
  • Thread