Penguin Card
| Materials List |
| Xyron Products Used |
| Xyron 510 |
| 510 Permanent Cartridge |
| Xyron Design Runner® |
| Design Runner Accessory Kit |
| Design Disc™ Maker |
| Design Runner Red Ink Cartridge |
| Adhesive Runner 3/8" |
| 3/8" Runner |
| Holiday Design Disc |
| Chalkboard Font Disc |
| Tools and Other Supplies |
| OTC Scallop Card |
| Imaginisce Holiday Paper |
| Brown Ink Pad |
| Instructions |
|
Step 1 - Trace the front of the card onto the tan polka dot paper,
cut it out, run it through the 510 and adhere it to the front of
the card.
Step 2 - Trace the scallops from the front of the card onto the red holiday paper. Cut out the scallops and the rest of the paper to make a 6" x 1 ¾" scalloped strip. Adhere it to the card as shown using the 3/8" runner. Step 3 - Cut out one penguin from the penguin holiday paper and ink the edges. Step 4 - Using the Design Runner, print the stitches across the card where the red and the tan paper meet. Then attach the penguin square you created in Step 3 to the center of the card. Step 5 - Using the Disk Maker, type the words "Have a Cool Yule", save them and print them using the Design Runner onto the blue holiday paper. Cut out the words, ink them and adhere them to the inside of the card using the 3/8" runner. Step 6 - Adhere a strip of 6" x 1 1/2" blue holiday paper to the bottom of the inside of the card. |
