Lucky Man Clock

Lucky Man Clock

Lucky Man Clock

Artist:
Marcy McChesney
Estimated Time:
Beginner Hours
Difficulty:
Intermediate

Step-by-Step Instructions

  1. Paint canvas, including edges. Let Dry.
  2. Using trimmer, cut the following pieces:
    Medium patterned paper - 11”x 5”
    Large patterned paper - 2 ½”x 4” and 4” x 6 ½”
    Small patterned paper – (2) 11”x¼”, and (2) 12”x ¼”
  3. Once canvas is dry, run all pieces of patterned paper through 510 Creative Station.
  4. Place 11”x 5” strip 2 ½” from left short edge of canvas.
  5. Place 2 ½”x 4” strip to the left side of previous piece, approximately 1” up from bottom edge.
  6. Place 4” x 6 ½” strip adjacent to previous piece on right side of canvas.
  7. Apply ¼” strips along side of each section of paper. The 12” strips can be trimmed at 2 ½” to accommodate horizontal sections. The 11” strips will be placed vertically on canvas
  8. Run photo through 510 Creative Station. Place on canvas at intersection of large and medium patterned papers.
  9. From accent paper, cut title letters from Xyron Personal Cutting System, then run through 510 Creative Station. Letters can be used in conjunction with rub-ons.
  10. Carefully read and follow all installation instruction on packaging, and work on protected surface. Turn canvas facedown on work surface and use 3/16” punch to make hole through canvas.
  11. Various supplies can be used, such as stamps and ink, to create number spaces around clock face.
  12. Add any additional embellishments to your canvas clock.

Xyron Products Used

Scroll for More

Other Products Used

  • 11”x14” Artist Canvas with wrapped edges
  • (4) 12x12” sheets of patterned papers (small, medium, and large prints, and accent)
  • Clock workings
  • Acrylic Paint with brush
  • Black Journaling Pen
  • 4” x 5” photo
  • 3/16” Hole punch